Learning IOS and JUNOS

Junos Script Automation is a powerful and flexible on-box toolset which provides customization of network behavior, adaption to what your application expects to configure, manage and diagnose if and when needed. It sits right above the Junos OS, with a northbound interface to Junos Space applications, and southbound access to Junos SDK applications and native management plane instrumentation. This customized programmable solution makes your application smarter and better in real-time. In Juniper official website provides many script samples to match part of common requests. In my company, we deployed many inter-connections EBGP/IBGP between router or layer 3 switch. So I picked one op script from the JUNOS Script Library - show bgp policy : display all routing-policies in sequential order for a selected BGP peer.

Configuration Management Day 2 - How to review router configuration ? In Cisco IOS, it has two default configuration files:  (1) startup-config: is used for initialization of router boot up process   (2) running-config.  is the real-time concurrent configuration repository whenever you type any commands in IOS. And how do you differentiate screen output is the startup-config or running-config ?

Once a use, forever a custom My first-time experience of Cisco router installation was in 1997, when I was a junior network engineer in a small company. I remembered that day I finished installing a customer router on-site for only 15 mins then I left and went back again after 2 hours to configure the router via console again..because I forgot to configure password under line vty (I told myslef I would never made such stupid mistake again like that - Password required, but none set ) After 13 years later, I started to learn JUNOS since 2010. Because I familiar Cisco IOS so much, so I knew the feeling of use behavior change from IOS to JUNOS. The hierarchical structure is not so easy to read when you see it in the first time.(especially when you have no any programming experience) However, having the use experience of Cisco IOS is a not a bad thing before you start to learn JUNOS. I believe if you can leverage your previously IOS command knowledge then map to JUNOS relative s...

In order to prepare the future migration from Juniper SSG to SRX, so I tried to use SRX GUI interface to see how its easy for operation team to sustain this. This is the first time I tried to use GUI to manage a router, and if you are not familiar with Juniper SRX features and functions, I have to say its a quick start to have a glance overview of Juniper SRX by web interface. For many junior engineers, if they can have what-you-see-what-you-get interface, they will accept new technology as fast as they can or they might refuse to try or to learn new technology if there's no time pressure or instructions from high-level managers directly . We are still using CLI to control most routing and switching network device today, but I believe someday the condition may change if the network virtualization come true.(I think no one would like to control firewall by CLI, isn't it ?)

Cloud era is coming, so its time to learn those you are not familiar with. Amazon Web Services, aka AWS, nevertheless to say is the No.1 cloud service you should know immediately now.

Learning openstack is not an easy task for me, because I don't have much linux knowledge. During the openstack setup process followed by Openstack.org official installation guide, I spent more than 3 hours to install necessary modules and modified the configuration files one by one. But I failed and I cannot figure out what the problem is...maybe I should spend more time to understand each action and verify it one-by-one. But I don't have so much time to waste on installation procedure, I need to familiar the openstack as soon as possible to test its feature. So I tried to leverage Devstack all-in-one install script to help me to learn what is openstack and see how it works. However, its still not just so simple just like Devstack.org said if you are installing openstack first time:

Juniper CLI learning is a little challenge for junior network engineers or Cisco IOS engineers, because the JUNOS modular and hierarchical structure design. Some features may need several command line which were configured under different hierarchical levels, then combined all of them together in another hierarchical level. Such kind of CLI design especially not easy to learn when apply CoS on juniper device.(I believe many Cisco IOS engineers don't want to switch to JUNOS because of this...) As above figure is my understanding about the related JUNOS command which is using in our production network.