Bluecoat PacketShaper Bootcamp Day1 Notes
今年Bluecoat併購了一家歷史優久的網路設備商Packeteer，其著名產品可能很多人都有聽過 - PacketShaper，至於為什麼Bluecoat會併購Packeteer，想當然而就是希望1+1大於2效應，兩家產品各有所長，如果可以雙劍合一對網路管理者來說當然是最好不過的事(in-line service大家都不希望看到太多可能的變數)，不過短期內應該仍會是以不同系列的產品來供應市場，也許未來會有更進一步的整合計劃，就讓我們拭目以待!
在這次的Bootcamp中主要的課程內容是以實作為主，所以大部份的時間都是由講師來講解使用上的注意事項及使用經驗分享，對於第一次接觸PacketShaper的人來說有點緊湊，有一個很主要的原因那就是大家手上並沒有講義可以翻閱，有時如果一時失神沒聽到或是沒看到DEMO畫面的話，可能就會不知道剛剛miss掉了那些東西，不過整體來說至少可以對於PacketShaper產品有一個概括的了解，簡單上架設定應該是不成問題。但是如果可能的話，最好還是可以參加比較正式的課程才會有完整性的了解!
以下是小弟那兩天的筆記，不過由於PacketShaper主要是利用GUI畫面來設定，所以小弟的筆記有限只能針對CLI的部份作註記請各位諒解!
．Packetshape Password Recovery
重開機之後，在第一個輸入密碼畫面輸入'touchpwd='
(如果打錯必須再次重開機)
．密碼分為兩個層級：
touch 123 (touch level password 123, blank password in default)
look 123 (look level password 456, blank password in default)
如果password相同，會使用最高權限level
PacketShaper#reset (重開機)
PacketShaper#setup reset all (Reset to Factory Default)
．Press Q to skip prompt text
．207.78.98.254 (default IP)
．unconfigured.packeteer.com (default FQDN)
PacketShaper#net nic (check interface status)
PacketShaper#version verbose (check version information)
PacketShaper#ls (List files and Directories)
PacketShaper#pwd (To check current directory)
PacketShaper#cd 9.256/ (change current directory to Flash)
PacketShaper#cd 9.258/ (change current directory to HardDisk)
．Upgrade Image
PacketShaper#image load 832g1std.zoo (image file not support filename length
more than 8 characteristics)
PS:DO NOT use Google browser(chrome) to upgrade image. The PacketShaper will be reloaded.
If you see a warning message:
Message for /dll/obsoleted_plug-in_names, Obsoleted Plug-ins: AFS.PLG, AR825V1.PLG, MSNGR71.PLG, PANDO73.PLG, QQ73.PLG, VENTRILO.PLG
You can use rm command to delete all above plug-in files(not compatible with new image version)
PacketShaper# rm ?
usage: rm [-rif] filename...
PacketShaper# image show (Check active and backup images information)
Active Image version: PacketShaper v8.3.2g1 2008-08-22
Backup Image version: PacketShaper v8.2.5g1 2008-01-21
Bootloader version : M30 Bootloader v3.0
Inside/Outside interface set to SECURE means you can't remote control via inside/outside interface
Inside/Outside interface set to LIST means filter by ip address/network, separate by comma or space.
．Use Command to force to revert image(If new version is working)
PacketShaper# image revert (Rollback to previous image version)
PacketShaper# reset
．Press Ctrl-B when booting process, it will change back to previous version image.(If new version is not working)
．LAN Expansion Module(LEM)
．Built-in Classes should not be deleted.
#setup reset all (reset to factory default)
#setup discover off (Disable discovery)
#setup show (Check local setting)
#class reset (Reset class)
#traffic tree (show traffic tree)
在這次的Bootcamp中主要的課程內容是以實作為主，所以大部份的時間都是由講師來講解使用上的注意事項及使用經驗分享，對於第一次接觸PacketShaper的人來說有點緊湊，有一個很主要的原因那就是大家手上並沒有講義可以翻閱，有時如果一時失神沒聽到或是沒看到DEMO畫面的話，可能就會不知道剛剛miss掉了那些東西，不過整體來說至少可以對於PacketShaper產品有一個概括的了解，簡單上架設定應該是不成問題。但是如果可能的話，最好還是可以參加比較正式的課程才會有完整性的了解!
以下是小弟那兩天的筆記，不過由於PacketShaper主要是利用GUI畫面來設定，所以小弟的筆記有限只能針對CLI的部份作註記請各位諒解!
．Packetshape Password Recovery
重開機之後，在第一個輸入密碼畫面輸入'touchpwd='
(如果打錯必須再次重開機)
．密碼分為兩個層級：
touch 123 (touch level password 123, blank password in default)
look 123 (look level password 456, blank password in default)
如果password相同，會使用最高權限level
PacketShaper#reset (重開機)
PacketShaper#setup reset all (Reset to Factory Default)
．Press Q to skip prompt text
．207.78.98.254 (default IP)
．unconfigured.packeteer.com (default FQDN)
PacketShaper#net nic (check interface status)
PacketShaper#version verbose (check version information)
PacketShaper#ls (List files and Directories)
PacketShaper#pwd (To check current directory)
PacketShaper#cd 9.256/ (change current directory to Flash)
PacketShaper#cd 9.258/ (change current directory to HardDisk)
．Upgrade Image
PacketShaper#image load 832g1std.zoo (image file not support filename length
more than 8 characteristics)
PS:DO NOT use Google browser(chrome) to upgrade image. The PacketShaper will be reloaded.
If you see a warning message:
Message for /dll/obsoleted_plug-in_names, Obsoleted Plug-ins: AFS.PLG, AR825V1.PLG, MSNGR71.PLG, PANDO73.PLG, QQ73.PLG, VENTRILO.PLG
You can use rm command to delete all above plug-in files(not compatible with new image version)
PacketShaper# rm ?
usage: rm [-rif] filename...
PacketShaper# image show (Check active and backup images information)
Active Image version: PacketShaper v8.3.2g1 2008-08-22
Backup Image version: PacketShaper v8.2.5g1 2008-01-21
Bootloader version : M30 Bootloader v3.0
Inside/Outside interface set to SECURE means you can't remote control via inside/outside interface
Inside/Outside interface set to LIST means filter by ip address/network, separate by comma or space.
．Use Command to force to revert image(If new version is working)
PacketShaper# image revert (Rollback to previous image version)
PacketShaper# reset
．Press Ctrl-B when booting process, it will change back to previous version image.(If new version is not working)
．LAN Expansion Module(LEM)
．Built-in Classes should not be deleted.
#setup reset all (reset to factory default)
#setup discover off (Disable discovery)
#setup show (Check local setting)
#class reset (Reset class)
#traffic tree (show traffic tree)
Comments